Are led grow lights a fire hazard?

(Last Updated On: November 14, 2021)

You may have been blessed with your LED grow lights. However, for a variety of reasons, this blessing can quickly turn into a curse, causing your garden plants to catch fire.

When it comes to indoor cultivation, LED grow lights are unquestionably a wise investment. Considering a variety of factors, it is a significant asset to your in-house gardening efforts. Nonetheless, you must make certain that your LED grow light setup is flawlessly executed.

Furthermore, you must be connected with a licensed electronic expert who will examine your grow light to determine whether it is electrically well-equipped or not.

Why? Because you never know when your LED grow lights will become overheated and catch fire, potentially creating a fire hazard.

Are LED grow lights a hazard when it comes to fire?

You may be putting yourself and your family in danger by using LED grow lights. Nonetheless, suffering, death, and home destruction can be avoided if you follow some simple guidelines.

Most Importantly, Inspect the grow room regularly to ensure that it is in good condition. Additionally, you should keep your grow room away from anything that has the potential to catch fire. This is an initial safeguard.

Next, your attention is focused on the wiring system of the grow lights. If even a minor malfunction is discovered, notify your electrical contractor immediately so that he can correct the problem as soon as possible. Don’t even try to fix it alone, with a little knowledge over electricity.

Most importantly, you must conduct research and purchase LED grow light bulbs that are not potentially hazardous due to the possibility of a fire.

You must know that fire hazards will never send you a notification before they take place. As a result, it is up to you to fight it. In order to effectively prevent fires and even fight them, it is preferable for you to have readily available types of equipment in your immediate vicinity.

Because it is your garden, you have the right to choose needful to protect your plants. You should become familiar with the fundamentals of fire safety.

Grow lights have the potential to cause a fire

Depending In which place or position most LED grow lights are installed, they can be dangerous. Those in residential areas, on roofs or in the yard account for the majority of their installations. As a result, if a fire breaks out, it can spread quickly and cause significant damage to property and human life. So, it is important to remember that LED grow fires can cause significant damages that you can never even imagine of so.

Now, let’s get down to the technical side of things. To believe that watching YouTube videos and reading manuals can make you more efficient when it comes to installing an LED grow light system in your garden is to put yourself and your garden in severe danger, my friend.

This collection of YouTube videos and instructional manuals will never make you proficient in wiring up the various components required for installing LED grow lights. Even a minor blunder can result in the loss of your life.

Assume that everything is in order. You are on the lookout for problems and have made certain that the LED grow light is properly wired and installed. Nonetheless, there is a possibility that your plantation will be put at even greater risk.

My friend, you have just read it correctly. You will regularly continue to water your plants on a daily basis. Water splashes have the potential to interfere with the lighting system, and you are well aware that the combination of water and electricity will almost certainly cause your garden to catch fire.

In addition to water, poor equipment is another factor that can cause your LED grow light to catch fire. If you invest on cheap and poor quality equipment, you must repent in the long run.

Let’s delve into some vital factor that plays a major role in this regard.

Reasons for LED Grow Light Fire hazards

LED Grow light fire hazards are primarily caused by two types of factors, which are as follows.

It’s possible that your LED grow lights are not properly wired. Furthermore, water splashes have the potential to cause your LED lights to catch fire. Alternatively, using substandard products can cause your LED lights to catch fire.

LED grow lights that are constantly in use become extremely hot. As a result, the rising temperature may be the immediate cause of your LEDs catching fire. This fire has the ability to spread in the blink of an eye and is extremely dangerous. The conductor, in this case, may be combustible materials found in your home’s backyard garden or yard.

However, despite all of these dangers, one thing is certain: you are protected by the safety precautions you have taken. Yes, you can protect yourself against every fire hazard by taking a variety of precautions.

Fire Safety Regulations and Various Varieties of LED Grow Light Bulbs

Do you recall the days when halogen bulbs were used? Halogen has been one of the most widely used bulbs in history. However, the possibility of a fire hazard is the main reason for their decline in popularity. Halogens are, in fact, flammable. As a result, they were eventually phased out over time.

Let’s look at some of the safest, most powerful, and modern LED grow light bulbs.

Fortunately, LED grow lights have become readily accessible, presenting a reduced risk of contact fire and using less power than traditional fluorescent lights. Here is a list of the most frequently encountered different kinds of grow lights:

High-Pressure Sodium Lamps or HPS Lamps

In addition to industrial lighting and many public outdoor areas, high sodium light bulbs (renowned as HPS Lamps and HPS lighting fixtures) are sodium lamps widely used in many outdoor areas.

Carparks, freeways, and other high-security areas are common places where they are installed. You can unquestionably rely on them to provide reliable results in your interior cultivation.

Their improved performance – approximately 100 lumens per watt – is a major factor in their widespread use. It is possible to achieve efficacies of approximately 150 lumens per watt with certain greater lightbulbs (>600 Watt).

Removing corrosion from any material composed of sodium vapour at high temperatures and pressures is extremely difficult to accomplish. The most difficult aspect of manufacturing a high in sodium lamp is overcoming this obstacle.

Fluorescent grow lights

Plant lighting has shifted in recent years to emphasize LED sources of illumination, and yet fluorescent lights are always commonly accessible and simple to use. They are indeed an outstanding light source for seeds and plant starts that are just getting started.

Fluorescent lights will not continue as long as LEDs, but they are more affordable and simple to install. Whether or not you choose to use them instead of LEDs is determined by the light requirements your special piece or plant requires indoors.

For a long time, fluorescent lights were the “go-to” source for plant lamps. They have fallen out of favour because they do not really last for a long period, are tender, heavy, and do not produce a high level of luminescence. To avoid this, the bulbs should not be used for flower or fruiting plants.

On the other hand, Modern fluorescents have increased lumen output, are available in compact bulbs, and have a longer lifespan than their predecessors.

In a real sense, the latest T5 lighting control systems generate less heat than older fluorescent bulbs, allowing them to be placed in the vicinity of the processing facility without the risk of burning the vegetation. These lights are also less power-hungry, and the light they emit is readily absorbed by the plant they illuminate.

Metal halide lights

If steel and halogen groups, metal halides are formed. Chloride (salt) and nuclear fuel hexafluoride are two examples. Metal halide lamps transfer electrons through a mixture of heavy metals and metal halide oxygen to produce light. They work similarly to certain other gas-discharge lamps (such as mercury vapour), mainly the gas composition. It vapour enhances both the performance and the effectiveness of the light in most cases.

Metal halide bulbs are 3-5 times more efficient than incandescent light bulbs and produce much better light quality. In many cases, they have such a high colour temp, depending on the specific combination of metal halides (up to 5500K). Therefore, metal halide bulbs are ideal for high-intensity applications such as vehicle headlights, athletic facility lighting, and photographic lighting. By far, the most advantageous feature of metal halides is the top quality light they produce.

LED grow lights are without a doubt the most dependable option for your grow lights out of all the options available. LEDs will ensure that your plants grow in a safe environment. LEDs are also energy-efficient, ensuring that your electricity bills do not exceed your financial constraints.

Electrical Circuit problems that lead to cause LED grow light explosions and fire

Especially if you enjoy gardening as a pastime, it’s still a significant investment. The only time this will come into play is when your electrical activities are involved. Yes, my friend, there should be no room for fantasy when it comes to setting up your electrical circuits.

It’s easily possible to unintentionally keep inviting fire hazards into your home when you don’t know how much amperage and wattage it can effectively manage.

To make you aware that a typical wall circuit only provides 10-20 amperes of power at 120 volts, which is insignificant in comparison. In most cases, different terminals are used on the same circuit, even if they are on different circuits. When operating at full power, a single 1,000-watt aluminium halide lightbulb or a high-intensity sodium ballast consumes 9 amperes at the operating voltage when operating at full force.

All of these facts indicate that only one cultivation light already is exceeding the load capacity of a wall’s circuit, and most unexperienced organic farmers will prefer not only to use both plugs of a channel with numerous different electrical equipment, but they’ll still configure surge suppressors, which will again exceed the load-bearing capacity of the circuit.

At finest, loading a circuit such as this will result in the circuit breaker continuously tripping whenever the circuit gets out of control, intermittently closing down all of your cultivation appliances. This can be a major issue relying on how delicate your seedlings are. In the worst-case scenario, these short circuits can start fires.

Troubleshooting Common Wiring Errors

It’s important to understand that simply using the appropriate power circuit will not be enough to keep you safe from fire hazards. The fact that your wiring up process plays an important role in the security of your LED grow light installation should not be underestimated by any means. These are the blunders to be on the lookout for:

In a circuit, a switchboard, also known as an electrical panel or a connection compartment, helps safeguard the hub of all the power cables even while comprising any ignition sources or high temperatures that may happen due to loose connections. A junction box can be found in almost any electrical installation. Just buy a good one.

Junction boxes should be installed flush with the wall surface to prevent interaction with highly combustible housing materials such as timber or plaster. This is done for fire safety reasons and to avoid touching combustible construction products. Purchase a pack extension and keep it somewhere around.

Ensure your electric cables just aren’t that short before actually connecting them. Inspect your distance to ensure you have enough of it. A fire may occur if wires are cut quite narrow and extend at electrical conductors, as power generation may endeavour to crossover here between cables and the contact, resulting in a potential fire.

Do not disclose wiring that has been coated with plastic to the components. Leaving wiring unsupervised raises the risk of becoming yanked softly, tattered, and saturated with water, which all imply a fire and electric shocks threat. Cables should indeed be managed to secure to 2x2s with screws or bolts. Fires are sparked by frayed electrical wires.

When assembling a three-slot access point above a two-slot container, make sure to include a ground wire. It is highly improbable that a circuit will manage three electrical devices linked to a power socket that does not have a three-wire exit route. Rather than, a two-slot nozzle should be used.

Installing electrical wiring without the use of clamps is not recommended. The use of clamps to safeguard wiring ensures that it remains linear and rigid, restricting arcing, short-circuiting, and other house fires from occurring. When it comes to plugging something, the most important thing to remember is to preserve wires well enough and distant from the surface.

It is important to understand the wattage and amperage of your LED grow lights. This knowledge of wattage must be guarded with great care. After that, you should devise a sound setup strategy and put it into action as planned.

Suppose your property doesn’t even have enough circuit design to accommodate a complete set of LED grow lights. In that case, you will either need to wire up again or find an alternative position for your operation. Don’t continue to push the circumstance.

Difficulties with the way a room is set up can result in grow light fires.

Aside from wiring issues, one of the most common causes of developing a fire is the environment where the lights are installed. People tend to build cultivation spaces in their residences, which puts them close to their living spaces, dangerous. Living rooms are cluttered with combustible items such as paper, textile materials, and other materials.

When setting up a grow room, be sure not to miss highly combustible garbage lying around where it could come into contact with warmer bulbs or ignites from the wiring. Also, before turning on the lights, check the room for anything that could catch fire (such as curtains).

For the most part, prevention is the most important factor in preventing household fires caused by grow lights because once a fire has been accidentally started, it can result in large numbers of the worth of damage or even the loss of human life. It’s important to go over everything thoroughly to avoid any possible fire sequence of events.

LED Grow Light Fires: How to Restrain Them

Once you’ve tidied up your grow room to the point where there’s there is nothing that will presumably burst into flames, and you’ve hooked up your grow lights appropriately to the point where they’re not electrical highly flammable, draw attention to fire preventative measures.

There are a few simple steps you can choose to build your grow room fire-safe, and they should be expected to go on in any domestic building, regardless of the size. The following are some suggestions for reducing the risk of a fire involving your grow lights:

The most essential thing you can do to keep your home safe from fire is to purchase a smoke alarm. Fire prevention equipment such as a smoke alarm is by far the most essential product you can own because it allows you to escape from the building before it is completely consumed by fire.

Have several of them strategically placed throughout the building where you are utilizing grow lights, and make sure to check the rechargeable batteries operation numerous times a year for your own protection. Battery replacement should be done on a regular basis.

As you never know, when the fire spreads, you better deploy a fire-resistant entrance, which is yet another excellent way to keep your home safe from fire. It is important to have a fire-resistant door installed on your grow room to prevent a LED grow light fire from spreading rapidly through the residence and allow you to get out of the housing complex before it has been completely consumed by flames.

Spending money on a sprayer system is something you should seriously consider. For significantly bigger grow light processes, a fire suppression system can put out a fire in a short amount of time. On the other hand, a sprinkler system can cause significant interior damage in a residential setting, so consider your options carefully before deciding on one.

The ultimate and perhaps most significant task you can complete is to purchase a fire extinguisher for your plantation. It is recommended that you purchase a number of them in order to avoid the greatest number of risks. It is possible to purchase a variety of different fire extinguishers so that you could always also have fully automated and hand-held fire extinguishers on hand in the event of a fire.

This is especially important for night flames, which can grasp people off guard while falling asleep and can be riskier than fires throughout the day due to their unpredictable nature.

Some fire extinguishers must be used manually, while others are programmed to activate automatically if a fire is detected. There are many various varieties of fire extinguishers you might keep on hand. Here are a few examples of the options that are available:

Aerosol extinguishers

These Aerosol Fireblockers are equipped with a connector for the electrical regulation and initiation mechanism of extinguishing generators, making them more efficient and productive in a fire emergency.

On the outflow side, a grid allows for the slow but steady transfer of the fire suppression aerosol to occur. It is possible to activate aerosol safety precautions and firefighting equipment in a variety of ways: automatically, manually, using thermal or smoke detection, etc. It is necessary to use an electrical impulse in order to initiate the chemical reactions of the sturdy fire suppression compound.

As soon as the fire extinguisher is powered up, the sturdy chemical is converted into a rapidly growing extinguishing aerosol that, after passing through a refrigerating segment, escapes through the discharge flow, having opened the firefighting equipment and puts out the fire in the designated protected area.

Once activated, aerosol fire extinguishers and fire extinguishing systems set in motion an enzyme hydrolysis in which the launched aerosol bonds with and entraps free radicals produced by combustion.

In contrast to traditional fire extinguishing methods such as asphyxiation (o2 removal) or cooling, airborne particles, firefighting equipment and fire suppression system systems stop the combustion reaction at the molecular level without adversely impacting the oxygen risks environment.

Hanging extinguishers

Among the characteristics of hanging powder from fire extinguishers are their rising fire-extinguishing capacity, outstanding non-conductive effectiveness, and low price. It applies to the extinguishing of fires involving sturdy substances, flammable materials, combustible gases, and electrical equipment at the start of the fire. A simple structure, not a pipeline or a circuit, is generally restricted above the protected object.

When the temperature of the sprayer reaches a specified level, the extinguisher can automatically activate the sprinkler and spray the fire, trying to extinguish the agent onto the fire. There are many places where fire can start, such as drying rooms in factories and mining industry substations and transformer rooms in warehouses and painting workshops where there are often no men to guard but where it is very easy to catch fire.

Hand-held extinguishers

Generally, a handheld fire extinguisher is a piece of equipment that is used to fight the fire. On the other hand, a portable fire extinguisher is only effective for the size and type of fire-rated structure.

Extinguishers are normally delivered as “first strike” units in firefighting and should only be used in the initial phases of a fire, first before fire expands to a size that exceeds the extinguisher’s capacity.

There are six fire extinguishers: wet chemical, air-water, dry chemical powder, foam, and carbon dioxide. Wet chemical fire extinguishers are the most common type.

Having a combo of fully automated fire extinguishers and conventional hand-held extinguishers in case you have extra assistance trying to put out a fire whilst it’s still relatively small and less dangerous is essential for maximum effectiveness.

Thank you so much for taking the time to read the entire article. I trust that the information I have provided above has been of assistance to you. Be the most secure. Best of luck in your gardening endeavours.

Leave a Comment

Your email address will not be published. Required fields are marked *

seventy five − seventy one =