How To Drain Intex Pool With Garden Hose

(Last Updated On: June 20, 2022)

Draining your Intex pool with a garden hose is a quick and easy way to get the job done. You’ll need to find a level spot on your lawn or driveway to place the hose, and make sure the hose is long enough to reach from the pool to the spot. Once you have the hose in place, simply open the drain plug and let the water drain out.

  • Attach one end of your garden hose to the drain plug on your Intex pool
  • Put the other end of the hose into a nearby drain or into a bucket
  • Open the drain plug to allow water to start flowing out of the pool
  • When the pool is empty, close the drain plug and remove the hose

How to DRAIN Your Intex EasySet Pool

How to drain intex pool without adapter

If you have an Intex pool, you may be wondering how to drain it without an adapter. Here are a few options to consider: 1. Use a garden hose: Attach a garden hose to the drain valve on the pool and open the valve.

The water will flow out of the pool and into your yard. 2. Use a sump pump: If you have a sump pump, you can use it to drain the pool. Simply connect the pump to the drain valve and turn it on.

The water will flow out of the pool and into the pump. 3. Use a wet vac: If you have a wet vac, you can use it to suck up the water from the pool. Simply place the vacuum over the drain valve and turn it on.

The water will be sucked up into the vacuum. 4. Use a pool cover: If you have a pool cover, you can use it to drain the pool. Simply place the cover over the pool and let the water drain into it.

Once the water is drained, you can remove the cover and dispose of the water.

Intex pool drain hose adapter

As the weather begins to warm up, many people are getting their pools ready for the season. If you have an Intex pool, you may need to replace the drain hose adapter. This part is essential for ensuring that your pool drains properly.

See Also  5 Best Soaker Hose For Garden [Updated 2022]


The Intex pool drain hose adapter is a small, plastic part that attaches to the drain hose. It has a threaded end that fits into the drain fitting on the pool. This part is subject to a lot of wear and tear and can eventually break down.

If your Intex pool drain hose adapter breaks, you can purchase a replacement at most hardware stores. Be sure to take the old adapter with you so that you can get the correct size. Once you have the new adapter, simply screw it into the drain fitting and reattach the hose.

With a little bit of care, your Intex pool will provide years of enjoyment. Be sure to check all of your equipment regularly to ensure that it is in good working order.

How to drain a pool with a garden hose

If you need to drain your pool but don’t have a professional grade sump pump, don’t worry! You can still get the job done with a garden hose. It may take a little longer, but it can be done.

To drain your pool with a garden hose, start by attaching the hose to a faucet. Then, open the faucet and place the end of the hose into the pool. Once the water starts flowing, let it run for a few minutes to get the pool down to a manageable level.

Next, start removing the drain plugs from the pool. You may need a screwdriver to do this. Once the plugs are removed, the water will start draining out of the pool.

Let it drain until the water level is low enough that you can safely remove the hose. And that’s it! You’ve now successfully drained your pool with a garden hose.

How to drain intex pool with pump

Are you the proud owner of an Intex pool? If so, you’re probably wondering how to properly drain it. Here’s a helpful guide on how to do just that!

First, you’ll need to remove the drain cap from the pool. Next, attach your garden hose to the drain valve and make sure it’s secure. Once that’s done, open the valve and let the water start draining.

See Also  Best Fire Hose Nozzle For Garden Hose


You may need to use a submersible pump to help speed up the process. If so, simply place the pump in the pool and let it do its thing. Once the pool is drained, you can then remove the hose and close the valve.

Be sure to give the pool a good cleaning before refilling it with fresh water. And there you have it! Now you know how to drain your Intex pool with ease.

how to drain intex pool with garden hose

Credit: summerbackyard.com

How do I manually drain my Intex pool?

If you have an Intex pool, you may need to manually drain it at some point. Here’s how to do it: 1. First, you’ll need to remove the drain cap from the pool.

You can do this by using a screwdriver to unscrew it. 2. Next, attach a garden hose to the drain. Make sure the hose is long enough to reach from the pool to a nearby drainage area.

3. Turn on the water at the hose faucet and let it run into the pool until the water level has lowered to where you want it. 4. Once the water level is low enough, remove the hose and replace the drain cap. That’s all there is to it!

Draining your Intex pool is a simple process that can be done in just a few minutes.

How do I drain my Intex pool without the adapter?

There are a few ways that you can drain your Intex pool without the adapter. One way is to use a garden hose. Another way is to use a submersible pump.

If you use a garden hose, you will need to attach it to the drain plug on the bottom of the pool. Then, you will need to open the valve on the hose so that the water can start flowing out of the pool. It is important to make sure that the hose is draining the water away from the pool so that the water does not flow back into the pool.

See Also  5 Best 75 Foot Garden Hose [Updated 2022]


If you use a submersible pump, you will need to place the pump in the water. Then, you will need to turn on the pump and let it run until the water is gone. Whichever method you choose, it is important to make sure that you do not leave the pool empty for too long.

This can cause the pool walls to collapse.

Can you drain a pool with a hose?

Yes, you can drain a pool with a hose. You’ll need to attach the hose to a faucet or spigot near the pool, and then open the valve to allow the water to start flowing out. Depending on the size of your pool, it may take several hours to completely drain it.

How do you drain a above ground pool with a garden hose?

If you have an above ground pool and need to drain it, there are a few options. One is to use a garden hose. To do this, you’ll need to attach the hose to the drain valve at the bottom of the pool.

Then, open the valve and let the water drain out. You may need to move the hose around to help the water drain more quickly. Another option is to use a submersible pump.

This is a pump that you can place in the water and it will pump the water out for you. You’ll need to attach the pump to a garden hose and then run the hose to a drainage area. whichever method you choose, be sure to do it slowly and carefully to avoid damaging your pool.

Conclusion

If you have an Intex pool and need to drain it, you can do so easily with a garden hose. First, remove the drain plug from the pool. Next, attach the garden hose to the drain valve and open the valve.

The water will begin to drain from the pool. Once the water level is low enough, you can remove the hose and close the valve.

Leave a Comment

Your email address will not be published.

+ 52 = 62