How To Replace Drive Belt On Craftsman Riding Mower

(Last Updated On: June 25, 2022)

Assuming you have the model number of your Craftsman riding mower, you can easily find a video online of someone replacing the drive belt on your exact model. For this Craftsman riding mower, you will need a 3/8 socket wrench, a ratchet, and a flathead screwdriver. The first step is to remove the battery and disconnect the spark plug wire.

Next, you will need to loosen the bolts that hold the deck in place. Once the deck is removed, you will be able to see the drive belt.

  • Park the mower on a level surface and engage the parking brake
  • Remove the spark plug wire from the spark plug to prevent the engine from starting while you’re working
  • Remove the deck by loosening the deck engagement lever and disengaging the deck drive belt from the pulleys
  • Inspect the drive belt for cracks or fraying and replace it if necessary
  • Reinstall the deck and deck drive belt
  • Reconnect the spark plug wire

Craftsman drive belt replacement

Craftsman riding mower drive belt diagram

If you’re a Craftsman riding mower owner, you know that when something goes wrong with your mower, it can be a big pain. One of the most common issues that can arise is a problem with the drive belt. If your drive belt is giving you trouble, you may be wondering where to find a Craftsman riding mower drive belt diagram.

The Craftsman website is a great resource for finding diagrams for just about any part of your mower. Simply enter your model number into the search bar and a list of diagrams will come up. Once you find the right diagram, simply print it out and take it to your nearest Craftsman dealer to get the right replacement part.

If you’re feeling a bit more adventurous, you can always try to replace the drive belt yourself. This is a relatively simple repair that even a beginner can handle. Simply follow the instructions in your Craftsman riding mower manual and you should be able to get the job done in no time.

Craftsman model 917 drive belt replacement

If your Craftsman model 917 lawn tractor isn’t moving as fast as it used to, or if it’s making a squealing noise, it’s probably time to replace the drive belt. This is a relatively easy repair that you can do at home, and it will only take a few minutes.

See Also  5 Best Oil For Troy Bilt Lawn Mower - Review And Guide
To start, you’ll need to raise the hood of the tractor and remove the old drive belt.

You can do this by loosening the tensioner pulley and sliding the belt off of the pulleys. Once the old belt is off, you can install the new one by routing it around the pulleys in the same pattern as the old one. Make sure the belt is tight before you lower the hood and start using the tractor again.

If you’re having trouble finding a replacement drive belt for your model 917, you can always contact a Craftsman dealer or customer service for help.

Craftsman 46” mower drive belt replacement

If you have a Craftsman 46” mower, chances are you will eventually need to replace the drive belt. This is a relatively simple repair that anyone with basic mechanical skills can do. To begin, you will need to disconnect the spark plug wire to prevent the engine from accidentally starting while you are working on it.

Next, remove the mower deck by loosening the deck bolts and lifting it off. Once the deck is removed, you will be able to see the drive belt. To remove the old belt, simply loosen the tension pulley and slip the belt off.

To install the new belt, thread it around the pulleys and tension it according to the manufacturer’s instructions. Once the new belt is in place, reattach the mower deck and spark plug wire and you’re ready to go!

Craftsman 42” mower deck belt replacement

If your Craftsman lawn mower is equipped with a 42-inch deck, you’ll need to replace the deck belt from time to time. This is a relatively easy repair that you can do at home, and it will only take a few minutes. Here’s how to replace the deck belt on a Craftsman 42-inch lawn mower:

1. Disconnect the spark plug wire from the spark plug. This will prevent the engine from accidentally starting while you’re working on it. 2. Remove the deck belt cover.

This is usually held in place by two or three screws. 3. loosen the tension pulley. This pulley is located at the top of the mower deck and is used to tension the deck belt.

See Also  How To Turn On A Zero Turn Mower


4. Remove the old deck belt. 5. Install the new deck belt. 6. Re-tension the deck belt.

7. Re-install the deck belt cover. 8. Reconnect the spark plug wire. That’s all there is to it!

Replacing the deck belt on your Craftsman 42-inch lawn mower is a quick and easy repair that you can do at home.

how to replace drive belt on craftsman riding mower

Credit: www.searspartsdirect.com

How do you put a drive belt on a CRAFTSMAN?

Assuming you are referring to a drive belt on a CRAFTSMAN riding lawn mower: 1. Park the Craftsman riding lawnmower on a level surface. Place the transmission in neutral by moving the shifter to the “N” position.

2. Remove the old drive belt from the engine pulley and transmission pulley. To do this, you will need to loosen the tension on the drive belt. There are two ways to do this.

The first way is to remove the spring from the tensioner arm. The second way is to use a belt tensioner tool. 3. Install the new drive belt on the engine pulley and transmission pulley.

Make sure the belt is routed correctly. 4. Adjust the tension on the drive belt. If you removed the spring from the tensioner arm, you will need to install the spring back on the tensioner arm.

If you used a belt tensioner tool, you will need to release the tension on the tool. 5. Start the engine and let it run for a few minutes. Check the drive belt to make sure it is tight and there are no leaks.

How do you change a drive belt on a riding lawn mower?

If you have a riding lawn mower, then at some point you will need to change the drive belt. This is a relatively easy task that you can do yourself, and it will save you money on having to take it to a repair shop. Here is how you change a drive belt on a riding lawn mower.

First, you need to disconnect the spark plug wire so that the engine will not start accidentally while you are working on it. Then, you need to remove the mower deck. On most mowers, this is simply a matter of removing a few bolts.

See Also  How To Mow A Ditch With A Zero Turn Mower


Once the deck is removed, you will be able to see the drive belt. There may be a cover over the belt, which you will need to remove. Then, you can loosen the tensioner pulley so that you can remove the old drive belt.

Now, you can install the new drive belt. Make sure that it is routed correctly, and then you can tighten the tensioner pulley. Finally, you can replace the mower deck and reconnect the spark plug wire.

That’s all there is to it! Changing the drive belt on a riding lawn mower is not difficult, and it is something that you can do yourself to save money.

How many belts does a CRAFTSMAN Riding Mower have?

CRAFTSMAN Riding Mowers have two belt systems: a drive belt and a mower deck belt. The drive belt connects the engine to the mower deck and powers the blades. The mower deck belt connects the pulleys on the mower deck to the blades.

Conclusion

If the drive belt on your Craftsman riding mower has snapped or worn out, you’ll need to replace it. Fortunately, this is a relatively easy task that you can do yourself. Here’s how to replace the drive belt on a Craftsman riding mower.

First, disconnect the spark plug wire to prevent the engine from accidentally starting while you’re working on it. Then, remove the mower deck so you have access to the drive belt. Next, remove the old drive belt.

To do this, you’ll need to loosen the tension pulley and remove the idler pulley. Once the old belt is off, you can install the new belt. To install the new belt, start by threading it around the tension pulley.

Then, route it around the idler pulley and under the deck. Once the belt is in place, you can tighten the tension pulley and reattach the mower deck. Finally, reconnect the spark plug wire and you’re done!

Replacing the drive belt on your Craftsman riding mower is a simple task that you can do yourself in just a few minutes.

Leave a Comment

Your email address will not be published.

14 + = 18